Preventing foundation settlement with the help of Caissons

So, your home has been built but the weather conditions, soil issues and moisture are creating a problem for the foundation to settle. Don’t worry! It happens with everyone, but not with the smart ones. Now you might be wondering who those smart ones are? Well, those smart ones are those people who use caissons for the foundation. Caissons are used when soil conditions are extremely poor. It is also used in the case when the structure is huge and large. Many hillside homes, building and high-rise complexes have been using caissons to provide additional support. Moreover, caissons are also used in constructing bridges and freeways as well as reclining walls of the hillsides. Whenever a hillside retaining wall is built, the soil behind the wall tries to exert pressure on the wall. Because of the pressure, the wall can fall, either by sliding or by collapsing. Caissons are built by drilling a large cavernous shaft.  After that the shaft is filled with reinforced with concrete made of soil and sand. The concrete is used along with steel and rebar as well.  The shafts are usually are drilled from 2’ to 12’ in diameter through the soil and into the bedrock. There are some shafts which are as deep as 150 feet. So, just in case if you have foundation settlement problems, you can choose caissons. However, these days there are a lot of people who get their house inspected by a seasoned foundation contractor to decide the type of foundation.

Soldier Pile Walls, Soil Nails and Dewatering: Why Are They Needed?

Contractors and engineers are rarely surprised when project plans start off with the need to retain a drilling company to perform highly specialized work. Homeowners and clients who are paying the bills, however, may find it unusual that their above-ground structures call for work below the earth’s surface before other phases can progress. There are some very good reasons for why a contractor may request the creation of a soldier pile wall, a structure requiring soil nails or even a process that involves dewatering. 

Drilling companies are generally called out to job sites before foundations are laid. In residential and commercial scenarios, their job typically calls for stabilizing the ground prior to other construction. In cases where excavations are required, soldier pile walls or soil nails might be used. These structures are designed to hold the earth in place. In doing so, these structures provide stability and safety for the project and its ultimate design. Dewatering might also be called for to ensure safe, more stabilized conditions if drilling takes place below or near the water table.

When soil nails or soldier pile walls are deemed necessary for stabilization, drilling companies are the experts called upon for good reasons. Firms that specialize in this type of construction have the expertise necessary to work in a variety of geological conditions. They understand what it takes to ensure safety and durability in the finished product. In addition, they know which techniques are most required to stop or prevent erosion or landslides, what might be required to ensure a large above-ground structure stands tall and more.

When drilling companies are called upon by contractors to stabilize job sites, perform dewatering and create soldier pile walls, their below-ground work essentially ensures success for everything else that is yet to come.

Why is My Contractor Saying Caissons Are Required?

When a company makes a decision to build a bridge, tower or especially large, heavy or tall building, most general contractors will say work needs to begin well below the ground. While business owners may instinctively know the requirement will be necessary if sub-ground levels are included in the design, excavation work may also be required in a number of other circumstances. When a contractor says caissons are a must, for example, the recommendation is simply being made to ensure proper foundational support for the above-ground structure.

Caissons are supports that are built by digging a hole into the ground with an auger. This hole is reinforced with steel and then filled in with concrete. The idea is to create a stronger foundation than straight building on top of the ground can provide. Like retaining walls that shore up the earth while a basement is being built, caissons are necessary to ensure safety. They are also, however, considered a must in many cases to ensure structure integrity for years down the road by preventing issues with compression or uplift as the true intended structure goes into place. Depending on the depth of the excavation required, dewatering work may also be required to ensure caissons are properly put into place.

Finding out a construction project that involves a large above ground feature must begin with an excavation below the earth can be a little disconcerting. This recommendation, however, is made to ensure the final design is strong, solid and meant to withstand the test of time. When contractors recommend caissons, retaining walls or dewatering, they are doing so to protect people and the required structure alike. 

Soil Nails: Why They Matter To Your Project

Whether the plan is to dig into the earth for a mining operation, build a road or shore up existing construction threatened by soil erosion, a drilling company may be called into to provide dewatering services and the placement of soil nails. This common construction technique is required to ensure ground stability in excavations.

Soil nails are part of a retention technique that is meant to hold the earth in place to provide security and stability for excavations. The idea is the create a wall of sorts to hold the earth in place so other work can continue safely.

Soil nail construction involves the creation of a top down wall. This wall involves the placement of nearly perfect horizontal holes into the earth. Inside the holes, steel bars are generally placed and then grouted to hold. This “nails” will then be reinforced with shotcrete or another reinforcing material to essentially create a wall that holds the earth in place. Dewatering is generally required to go along with this since soil nail wall construction must often extend below the water table to provide necessary support. Drilling companies provide this service, as well, pumping water out of the way so reinforcement work can go off without a hitch.

Soil nails are used to provide earth retention in a number of different scenarios. This type of wall, for example, is often built on the sides of highway overpasses. The technique may also be used to stop soil erosion that threatens existing properties. In addition, it’s commonly used in mining operations and other excavations where worker safety hinges on holding the earth around the excavated hole in place.

When there is a need to keep the earth in place, drilling companies have a number of techniques at their disposal. Soil nails may be the best option in many cases because of the relative ease and relative low expense associated with this method of earth retention. 

Why Dewatering May Be Needed For Drilled Shaft Placement

When construction plans call for creating a tall, especially large or heavy structure above the earth, work on the project will generally begin far below the ground level. Helping ensure future structural safety and stability often calls for placing a drilled shaft foundational support system in place.

A drilled shaft, also called a drilled pier or caisson, is a tall, cylindrical shaft that’s made from steel. Drilling companies bore holes into the earth, drop the shaft and then fill it in with concrete to provide stability to the foundation that will generally be built on top. Several of these structures may be required to provide support for the entire foundation. Once the drilled shafts are in place, work on the foundation begins.

Since a drilled shaft may call for digging more than 100 feet into the ground, dewatering may be required. This process is used in conjunction with many excavation projects when the water table is accessed during the drilling process. Dewatering involves pumping water out of the excavation point so the drilled shaft can be placed and the concrete set before the foundation is laid in place.

Providing structural support for a large building often calls for a construction process that begins below the earth. In many cases, a drilled shaft system may be required to ensure stability for what will be eventually be built. When there’s a need to provide stability for a large project, a drilling company with expertise in drilled shaft construction and dewatering can get the job done right.

Why Your Property Might Need Retaining Walls

It’s a simple fact that, over time, the earth shifts and moves. For those who live in areas where soil erosion is a concern, certain construction techniques can enhance safety while protecting property in the process. Retaining walls, for example, might be necessary additions as time passes.

Retaining walls and other similar structures are created by drilling companies to help keep the earth in place. Soil erosion near beach and waterfronts, for example, might require the creation of these structures to prevent further damage or prevent damage from occurring to nearby structures in the first place.

In some cases, brand new construction will call for the creation of piers or retaining walls to ensure stability. Retaining walls, as the name suggests, are designed to provide a way to help hold the earth in place. Piers are generally constructed for different reasons. These structures are built under ground to help provide continued support for construction that takes place above.

If soil erosion is a concern on property, contractors will generally call upon drilling companies to create retaining walls and other structures to lend stability. These walls may go up before the main structure is even built.  They may also be used as a remediation feature long after a home or building has been constructed if erosion begins to present as a problem.

If a contractor recommends calling in a drilling company to stabilize the soil, pay attention. The request is generally made to ensure safety and protection now and in the future.

How Dewatering Well Systems Work

Pre-drainage dewatering systems like deep well systems are versatile water pumping systems that can pump low to high volumes of groundwater for different kinds of applications. Deep welling is a method that is best suited for homogeneous aquifers extending well below the deepest part of an excavation. Typical deep well systems consist of a single or several individual wells, each with its own submersible pump placed at the bottom. They are used for confined aquifers and water tables and are used to lower the water table by a hundred feet or more on one lift, without the need for staging.

If you require a dewatering well system for your project, choose drilling companies that offer expertise and innovative turn-key solutions for your groundwater control needs. Find a professional service that offers comprehensive products and services and have expertise in all kinds of drilling and construction projects, ranging from constructing retaining walls and bridge piers to excavating deep wells, and more. The best drilling companies are those with the capacity to design, drill, install, and maintain your dewatering system as needed.

There are many advantages to installing dewatering systems. They give you the ability to penetrate different strata that are impervious to wellpoint systems. Deep well systems can also be installed up to 100 feet deep or even deeper in one stage. Most importantly, these systems can pump tens to thousands of gallons of groundwater per minute, per well, when using multiple well systems. Moreover, they can still be effective even when placed outside of a jobsite work area.

Deep well dewatering systems are designed for the purpose of pumping out large volumes of ground water. They are also used when the depth of excavation required are simply impossible to achieve using other dewatering or deep welling methods.